|
|
Hammer Drills
|
Model 97751
 6 Amp,
AC only
Machined steel chuck
Knob
selects hammer-drilling or drilling mode
Variable speed, reversing
Low
speed range: 0-1,000 RPM
High speed range: 0-2,500 RPM
0-20,000 BPM (low speed range)
0-50,000 BPM (high speed range)
Capacities: Low ... 3/4" masonry, 1/2" steel, 1"
wood; High ... 3/8" masonry, 5/16" steel, 3/4"
wood
100%
ball & roller bearings
Dust
sealed switch
360°
side handle with locking depth stop
Die-cast & precision machined metal gear housing
Standard Equipment: Drill, chuck key #875134, side handle
#698650, depth rod #698992, carrying case, and
operating manual
» Printer-Friendly Version
» Email to a Friend
|
|
|
Power
120 VAC, 50-60 HZ
Drilling Capacity (Inches) - Concrete
3/4 LO, 3/8 HI
Drilling Capacity (Inches) - Wood
1 LO, 3/4 HI
Length (Inches)
13-3/8
Carrying Case
Yes
Net Weight
7 Lbs.
Shipping Weight
12 Lbs. |
Motor
Amps
6.0
Motor Watts
720
Chuck Size
Gear Reduction
No load Speed (RPM)
0-1,000 LO, 0-2,500 HI
BPM
0-20,000 LO, 0-50,000 HI
Chuck Capacity (Inches)
1/2
Drilling Capacity (Inches) - Steel
1/2 LO, 5/16 HI |
|
|
|
